User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Section 5: Using the AXIS 240
47
Parameters
The CamImg parameters are optional. If a parameter is omitted, the
default value will be used. Some of the parameters can be overridden
at runtime. Click the Options button under the image frame above
for a demo.
Note:
❏ If the "Image" parameter is omitted, the image file fullsize.jpg
must be present in the same directory as the CamImg applet.
Pan/Tilt Java Control
This function is implemented within a Java applet, CamCtrl, that can
be started from anywhere on the network. The refresh rate is
programmable.
Image
Specifies a list of images to display. Multiple file names must be
separated by vertical bars ‘|’.
Syntax:
<PARAM NAME=”Image”
VALUE=”imgfile1 [| imgfile2 | ...]”>
Default value: “fullsize.jpg”
ImageLabel
Specifies a label for each image. Multiple labels must be separated
by vertical bars ‘|’.
Syntax:
<PARAM NAME= “ImageLabel”
VALUE=”label1 [| label2 ...]”>
Default value: The file names specified by the Image parameter.
Bgcolor
Specifies the background color of the applet frame.
Syntax:
<PARAM NAME= ”bgcolor”
VALUE= “#ffffff”>
Default value: “ffffce”
Image_Width See page 43.
Image_Height See page 43.
Interval Default value: 10 sec.