User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Configuring the AXIS 240
39
6. Once the editing is complete, save the file as config. Type
put
config CONFIG
to save the configuration file permanently. Note
that if the last uppercase
CONFIG
is omitted, the file will only be
stored temporarily until the next time the product is powered off.
7. To exit FTP, type the command
quit
,
bye
, or
exit
.
Caution!
❏ Windows 95 has a directory called
config
that contains
important system files. It is therefore important to change to
another directory using the
cd
command before modifying your
AXIS 240 configuration file from within a Windows 95
environment. Failure to do this may result in some of your system
files to be overwritten.