User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
Configuring the AXIS 240 AXIS 240 Users Manual
30
Configuring using a Web browser
To configure the AXIS 240, enter the name or IP address into the
location/address field of your Web browser:
On the AXIS 240 Home Page, click on the Settings link to reach the
Configuration pages.
The configuration parameters are grouped into these pages:
Image
Date & Time
Security
TCP/IP
Modem
Video
Pan/Tilt
Preset Position
Viewing Angle
Note:
❏ When configuring the AXIS 240 for the first time, log on as user
root and use the default password pass. You are recommended
to change the root password
,
since all Axis products are shipped
with the same password as default.
http://camserv/