User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Configuring the AXIS 240
29
Section 4 Configuring the AXIS 240
This section includes an overview of the AXIS 240 parameters.
You can configure the AXIS 240 via hyperlinks from within its own
web pages from any standard Web browser. Alternatively, you can
configure the AXIS 240 using FTP.
Refer to Appendix B - The Parameter List for a full listing of the
configuration parameters.
Note:
❏ For the latest technical information, access the AXIS 240 web site
at http://www.axis.com/products/cam_240/