User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
Assigning an IP Address AXIS 240 Users Manual
26
Using RARP in UNIX
Follow these steps to use the RARP method in UNIX:
1. Append the following line to your Ethernet Address table. This is
typically performed using the command
/etc/ethers
:
Example:
2. If necessary, update your host table and alias name databases as
described required by your system.
3. If it is not already running, start the RARP daemon. This is typically
done using the command
rarpd -a.
4. Restart the AXIS 240 to download the IP address.
<Ethernet address> <host name>
00:40:8c:10:00:86 camserv