User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
Assigning an IP Address AXIS 240 Users Manual
22
Using the AXIS IP
Installer
The AXIS IP Installer is a program that installs the camera server IP
address for you. It also allows you to access the camera server home
page via a Web browser. The program is available on the AXIS Online
CD and on the Axis Web Site at http://www.axis.com
1. On the AXIS Online CD, click on the Software button.
2. Select the IP Installer and click Install. The AXIS IP Installer -
Setup dialog is displayed on the screen.
3. Follow the instructions as they appear on the screen.
4. Click Finish to complete the setup.
5. Run the AXIS IP Installer from the Start menu. The AXIS IP
Installer dialog is displayed on the screen.
6. Restart your camera server.
7. Select the serial number of your camera server in the list. The serial
number is identical to the Ethernet address of the unit.
8. Enter the desired IP address. Click Set IP address. The IP address
will now be set.
9. To access the home page of the camera server, click Home page of
selected Axis-server... You can now configure the camera server
according to your requirements.
10. Click OK to exit the program.
For more help during the installation of the IP address, click Help or
F1.