User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Installing the AXIS 240
17
1. Start your Web browser and enter the name or IP address:
or
The Home Page of your AXIS 240 appears:
2. The camera ports are enabled by default. Click on the Settings link
and then the Video button to display the Configuration - Video
page. Select the default camera, and disable the unused camera ports.
3. If you are using a Pan/Tilt device, you must configure the AXIS 240
according to the description in Appendix F - Setting Up the AXIS 240
for Pan/Tilt Connection.
http://camserv/
http://172.16.253.80/