User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
AXIS 240 Users Manual Installing the AXIS 240
15
Indicators
Active
The Active indicator flashes on every occasion one of the connected
cameras takes a snapshot.
Power
The Power indicator is normally lit while power is applied. If it is not
lit, or it flashes, there is problem with the AXIS 240 power supply.
Network
The Network indicator flashes to indicate network activity.
Control Button
The Control button is used for multiple purposes, e.g. restoring the
factory default settings, triggering CRON scripts. Refer to the
appropriate sections of the manual.
Serial Number
The serial number is located on the underside label of the AXIS 240.
Please note that the serial number of your AXIS 240 is identical to the
Ethernet address of the unit.
Stage 3. Connecting the AXIS 240 to your Cameras
Connect the cameras to the AXIS 240 using the appropriate
cables/connectors. The AXIS 240 can service up to 4 coax/BNC
cameras and one S-video camera.
Optionally, you can connect a Pan/Tilt device to the RS232 Pan/Tilt
port of the AXIS 240 for automated adjustment of the camera
position. The AXIS 240 can control one Pan/Tilt device at a time, or
several if they are daisy chained. Refer to the Pan/Tilt documentation
on how to connect the cameras.