User Manual
Table Of Contents
- Cover
- Section 1 Introduction
- Section 2 Installing the AXIS 240
- Section 3 Assigning an IP Address
- Section 4 Configuring the AXIS 240
- Section 5 Using the AXIS 240
- Appendix A Troubleshooting
- Appendix B The Parameter List
- Appendix C Updating the Software
- Appendix D Technical Specifications
- Appendix E The Auxiliary IO Port
- Appendix F The RS232 Serial Ports
- Appendix G Camera Applications
- Appendix H CRON Script Command Reference
Appendix H: CRON Script Command Reference AXIS 240 Users Manual
116
Additional Options
In addition to the options described above, the following optional
settings are also available:
-ctrlport
Specifies the TCP port number in the range [0..65534] to be
used as the control port for the FTP server.
-dataport
Specifies the TCP port number in the range [0..65534] to be
used as data port for the FTP server.
-to Specifies the timeout, i.e. the FTP session will terminate when
the specified time limit has expired. Format:
h<hours>m<minutes>s<seconds>.
However, these options can only be used via a text editor.