Owner`s manual

6
G. SETUP
Press SETUP to display the Main screen of the SETUP Menu on the
screen. Press SETUP again to exit the SETUP Menu and the unit
will resume its last playback mode.
1) Press SETUP, the General Setup Page will display on screen.
a).Select TV Display using the UP/DOWN button, and then press RIGHT
to enter the submenu. Select the TV display mode on the screen
using UP/DOWN, and press ENTER to confirm the setting. Press
LEFT to return.
* Normal/PS: When the player outputs signal to a normal TV, and a
wide picture is shown on the full screen. Some of the picture sides will
not be visible.
* Normal/LB: When the player outputs signal to a normal TV, and a
wide picture is shown on the screen with black strips at both the top
and bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a
wide picture is shown on the full screen.
b).Angle Mark
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are
disc dependent.
c) OSD Lang
You can choose the language you desired as the OSD language.
d). Screen Saver
*On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after
approximately five minutes if the same image remains on the screen.
*Off: Disables screen saver.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com