PORTABLE DIGITAL LCD TV AXN-8705 USER’S MANUAL
Introduction Congratulations on purchasing your Portable Digital TV. On June 12, 2009 the conversion to digital television broadcasting will be complete throughout the United States and Puerto Rico. Your portable digital television is designed to pick up both the older analog signals as well as the new digital signals. In addition, you can use your digital TV to view movies from a VCR or DVD player.
13) 14) 15) 16) 17) 18) 19) Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules.
Table of Contents Introduction Important Safety Information……………………....Ⅰ FCC Compliance……………………………………Ⅲ Accessories………………….................................Ⅲ Getting Started Controls Inputs&Outputs ......................................1 Antenna................................................................2 Power Adapter......................................................3 Remote Control ....................................................3 External DVD or VCR Connection........................
Getting Started Controls Inputs&Outputs Front panel and side panels 1. Portable receiving antenna antenna) (the antenna jack can plug the accessory 2. Front panel buttons (include Ok, Cursor up, Cursor down, Cursor left, Cursor right, Menu, Mode, 16:9/4:3) 3. LCD Screen 4. Infrared remote receiver 5. Headphone jack 6. Video input and audio input jack 7. Power supply jack 8. Speakers 9.
Getting Started Red – Device turns off and charge battery. Blue –Device turns off and charge battery full. Green –Device turns on and battery not charges. Green, red –Device turns on and charge battery. Green, blue –Device turns on and charge battery full. 10. Power key Rear panel 11. Cooling holes 12. Stand 13. Li-ion battery cover Antenna The TV unit is supplied with a telescoping antenna that will provide good reception in most situations.
Getting Started Your device is also supplied with an external antenna that can be located at a short distance away from the TV to improve reception. Simply remove the telescoping antenna by positioning the antenna vertical to the TV and gently pull up. Insert the external antenna plug and position the antenna for best reception. AC Power Adapter The TV unit is supplied with a 120V AC Power Adapter for charging the internal battery and for powering the unit.
Getting Started NUM 1 2 3 4 5 6 7 8 9 Description 0-9 Number buttons: To change the channel and to select individual menu options. Volume Down ◄: Move left/change settings in menus. Decrease the volume level in viewing mode. Return button (return to the last channel): To exit a selection or to close the menu. Channel Down▼: Move down in the menus and change to the previous channel in viewing mode. Channel Up ▲: Move up in the menus and change to the next channel in viewing mode.
Getting Started External DVD or VCR Connection You can also use the TV to display a program using a DVD player or VCR. Use the included AV cable and connect as shown. Pay careful attention to the color codes. Yellow is for the video signal. The Red and White plugs are for the audio right and left. Note: To change from broadcast TV mode to external Audio/Video mode. Connecting to Earphones You may connect stereo earphones to the headphone jack for private listening.
Display Options & Channel Setup Use the on-screen menus to adjust the picture, audio, channels and other functions. Navigate the menus with the navigation buttons on the front of the TV or the Remote Control. Press MENU to enter the setup modes. Press MENU again to go back or exit the menu. Picture Menu Press the ◄ ► buttons to select . Press the ▼ button to enter . Press the ▲▼ buttons to select the desired sub-menu.
Display Options & Channel Setup Audio Menu Press the ◄ ► buttons to select . Press the ▼ button to enter. Press the ▲▼ buttons to select the desired sub-menu. Balance Press the ▲▼ buttons to select Balance. Press the ◄ ► buttons to adjust the level. Prefer Language Press the ▲▼ buttons to select Prefer Language. This is your preferred language that will be chosen when a station transmits in more than one language. It applies to all channels. Press the ◄ ► buttons to make your selection.
Display Options & Channel Setup Time Zone Press the ▲▼ buttons to select Time Zone. Press the ◄ ► buttons to select the desired time zone. Note: This item is only available under ATSC signal mode. Day Saving Time Press the ▲▼ buttons to select Day Saving Time. This will automatically adjust the internal clock when Daylight Savings Time is in effect. If your region does not observe Daylight Savings Time, turn this feature off. Press the ◄ ► buttons to select ON or OFF.
Display Options & Channel Setup Closed Caption Press the ▲▼ buttons to select Closed Caption and press the ► button to enter the submenu. Press ▲▼ buttons to select desired submenu. CC Mode Press the ▲▼ buttons to select CC Mode. Press the ◄ ► buttons to turn closed captioning ON or OFF. Basic Selection Press the ▲▼ buttons to select Basic Selection. Press the ◄ ► buttons to select CC1, CC2, CC3, CC4, Text1, Text2, Text3 or Text4.
Display Options & Channel Setup Channel Setup Each region has different broadcast channels. Your portable TV will scan for all the channels in the area and remember each location. You can then go through and add or delete channels individually as you prefer. When completed, pressing the up / down channel buttons will take you through all of your selected channels in sequence. Note: If you scan for broadcast channels (Air) and then switch to Cable TV, you will need to re-scan.
Display Options & Channel Setup Start to Scan Press the ▲▼ buttons to select Start to Scan. Press the ► button to start scan. The unit will automatically memorize the available channels in sequence. When completed the unit will tune the first scanned channel. To stop scanning, press Menu. Auto Scan Add CH Press the ▲▼ buttons to select Auto Scan Add CH.This will search for any new channels that were not previously found.
▼ buttons to select the desired character or symbol to edit the Channel name. Press the MENU button to return to the previous menu. Troubleshooting Before contacting customer service, review the steps below to solve simple problems. If you still suspect something wrong with this unit, immediately turn the power off, disconnect the power connector from the unit, and contact Customer Service. Never try to repair the unit yourself.
Troubleshooting Remote Control Remote control is out of Point remote control range directly at front of TV no Does Not Work more than 15 feet away Weak battery Replace CR2025 battery Problem No Display Possible Cause Possible Solution Power switch is off or power Check power switch and adapter is not connected power adapter properly connection Weak battery Charge battery with power adapter Other possibilities Static or other external interference may cause the unit to function abnormall
America Action, Inc. (“AXN”) Product Warranty Information What the warranty covers: America Action, Inc. (“AXN”) warrants your AXN products against defects in material and workmanship during the warranty period from the original date of purchase, subject to the following terms and conditions.
Module. 5. No Defect Found (product returned to AXN as defective but failure is not duplicated by AXN’s test method). 6. Customer instruction, installation, set up adjustments, or signal reception problems. 7. Rechargeable batteries. 8. Product without proof of purchase. (The proof of purchase should be one of the following documents: purchase receipt, gift receipt, sales invoice, and packing list that contains the product model number, price, vendor, and purchase date.) 9.
2. AXN will contact the customer upon receipt of the RMA Request Form, and will issue an RMA number if the RMA Request Form is completed and delivered as requested. 3. Please take or ship RMA product to AXN or any AXN authorized service center with RMA number clearly and marked on the outside of the packing. All RMA products should be returned in secured packaging, preferably in the original package, with the complete set of accessories.
AMERICA ACTION INC. 100 EXCHANGE PL POMONA, CA 91768 PH: (909) 869-6600 FAX: (909) 869-5545 CONTACTUS@AXIONZONE.COM HTTP://WWW.AXIONZONE.
