Specifications

Trouble Shooting

The icon ( ) appears on screen?

The feature or action cannot be completed at this time because:

1. The disc’s software restricts it.

2. The disc’s software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number that is out of range.

Picture is distorted?

1. The disc might be damaged. Try another disc.

2. It is normal for some distortion to appear during forward or reverse

scan.

No forward or reverse scan?

1. Some discs have sections that prohibit rapid scanning or title and

chapter skip.

2. If you try to skip through the warning information and credits at the

beginning of a movie, you won’t be able to. This part of the movies

often programmed to prohibit skipping through it.

IR sensor inoperative?

1. Verify that the batteries in the remote are fresh.

2. Verify that the remote sensor eye is not obstructed.

3. Verify that the infrared transmitter is affixed over the sensor eye

of the component to be controlled.

Disc won’t play?

1. Insert a disc with the label side facing up.

2. Check the type of disc you put into disc tray. This DVD only plays

digital video discs, audio CDs and MP3s.

Play starts, but then stops immediately?

1. Both the unit and the disc are coded by region. If the regional

codes don’t match, the disc can’t be played. This DVD is Region

Number 1.

2. The disc is dirty. Clean it.

3. Condensation has formed. Allow player to dry out.

PDF created with pdfFactory Pro trial version www.pdffactory.com