User`s manual

STX88831 STX Evaluation Platform Module Series User’s Manual
AMI BIOS Utility
48
 Boot Settings Configuration
 Quick Boot
Enabling this item lets the BIOS skip some power on self
tests (POST). The default setting is Enabled.
 Boot Num-Lock
Use this item to select the power-on state for the NumLock.
The default setting is On.
 PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for
the PS/2 mouse or allow other devices to make use of this
IRQ. Here are the options for your selection, Auto, Enabled
and Disabled.
 Wait For ‘F1’ Of Error
If this item is enabled, the system waits for the F1 key to be
pressed when error occurs. The default setting is Enabled.
 Hit ‘DEL’ Message Display
If this item is enabled, the system displays the message
“Press DEL to run Setup” during POST. The default setting
is Enabled.