User`s manual

STX88831 STX Evaluation Platform Module Series User’s Manual
AMI BIOS Utility
41
Disabled
This setting prevents the system from entering
suspend mode. This is the default setting.
1 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 1 minute.
4 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 4 minutes.
10 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 10 minutes.
 Throttle Slow Clock Ratio
Use this item to specify the speed of the system clock
when running the power saving states.
 Power Button Mode
This option specifies how the externally mounted power
button on the front of the computer chassis is used. The
default setting is On/Off.
On/Off
Pushing the power button turns the computer
on or off. This is the default setting. This is the
default setting.
Suspend
Pushing the power button places the computer
in Suspend mode or Full On power mode.
***** Advanced Resume Event Controls *****
 Resume On RTC Alarm
You can set “Resume On RTC Alarm” item to enabled and
key in Data/time to power on system.