User`s manual

STX88831 STX Evaluation Platform Module Series Users Manual
Jumpers and Connectors
9
2.3 Jumper Settings
Proper jumer settings configure the STX88831 to meet your application
purpose. We are herewith listing a summary table of all jumpers and
default settings for onboard devices, respectively.
Jumper Default Setting Jumper Setting
JP1 LVDS Voltage Selection
Default 3.3V
Short 1-2
JP2 Normal Operation/Clear CMOS setting
Default Normal Operation
Short 1-2
SW1 Auto PowerButton Mode Selection
DefaultATX Power Mode
ON
2.3.1 LCD Voltage Selection Jumper (JP1)
The board supports +3.3V or +5V flat panel displays. Configure the
jumper JP1 to the appropriate voltage of the flat panel.
Descriptio
n
Function Jumper Setting
3.3V
(Default)
LCD
Voltage
Selection
5V