User`s manual

SHB210 Socket M Half-Size SBC User’s Manual
Award BIOS Utility
46
Disabled
The System will never enter the SUSPEND mode.
1/2/4/6/8/10/2
0/30/40
Min/1 Hr
It defines continuous idle time before the system
entering the SUSPEND mode.
If any item defined in (J) is enabled and active, the
SUSPEND timer will be reloaded.
z HDD Power Down
If HDD activity is not detected for a specified length of time in this
field, the hard disk drive will be powered down while other devices
remain active.
z Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It
also allows users to define which type of soft power OFF sequence
the system will follow. The default value is “Instant-Off”.
Instant-Off
This option follows the conventional manner of system
performance when turning the power to OFF. Instant-
Off is a software power OFF sequence requiring the
power supply button is switched to OFF.
Delay 4 Sec.
Upon the system’s turning OFF through the power
switch, this option will delay the complete system power
OFF sequence approximately 4 seconds. Within this
delay period, the system will temporarily enter into the
Suspend Mode enabling you to restart the system at
once.
Press <Esc> to return to the Main Menu page.