User`s manual

SHB210 Socket M Half-Size SBC User’s Manual
Hardware Installation
23
3. If the cooling solution prevents you from accessing the
processor socket, you may need to remove it. Instructions on
how to remove your cooling solution should be provided in the
documentation that came with the system.
4. To un-install the current processor, use a screwdriver to
disengage (open) the socket actuator, as shown in Figure 1
below. (The most commonly used sockets are Molex* or
FoxConn* sockets, so they are used in the illustrations below.)
The socket actuator should open after only a half turn or so,
and you should then be able to remove the processor with your
fingers.