User`s manual

SHB210 Socket M Half-Size SBC User’s Manual
Jumpers and Connectors
16
CRT Connector: CN14
CN14 is a standard 15-pin pin DB15 connector commonly used for the
CRT VGA display.
Pin Signal Pin Signal Pin Signal
1 Red 2 Green 3 Blue
4 N/A 5 GND 6 AGND
7 AGND 8 AGND 9 N/A
10 GND 11 N/A 12 DDC DAT
13 Horizontal Sync 14 Vertical Sync 15 DDC CLK
CN14
2.4.9 Ethernet Connectors: CN5, CN7
The RJ-45 connectors CN5 and CN7 are for Ethernet.
Pin Signal
1
Tx+ (Data transmission
positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
4 RJ-1(For 100 base T-Only)
5 RJ-1(For 100 base T-Only)
6
Rx- (Data reception negative)
7
RJ-1(For 100 base T-Only)
8
RJ-1(For 100 base T-Only)
A
Active LED
B 100/1000 LAN LED
CN5, CN7