User`s manual

SHB108 LAG1156 Full-Size SBC User’s Manual

Configuring SATA for RAID Function

(5)-3 If the Setup correctly recognizes the driver of the floppy disk,

a controller menu will appear below. Use the ARROW keys

to select Intel®

ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller and

press ENTER. Then it will begin to load the SATA driver

from the floppy disk.

Note: If a message on the screen saying that one or some file(s) cannot

be found, please check the floppy disk or copy the correct SATA

driver again from the driver CD.