User`s manual

SHB108 LAG1156 Full-Size SBC User’s Manual
Configuring SATA for RAID Function
73
(5) Installing the SATA controller driver during the OS
installation
Now, the SATA driver disk is ready, and BIOS settings configured, you
can proceed to install Windows 2000/XP onto your SATA hard drive
using the SATA driver. Here is an example for Windows XP installation.
(5)-1 Restart your system to boot the Windows 2000/XP Setup
disk, and press F6 button as soon as you see the message
"Press F6 if you need to install a 3rd party SCSI or RAID
driver". After pressing the F6 button, there will be a few
moments for some files being loaded before next screen
appears.