User`s manual

SHB108 LAG1156 Full-Size SBC User’s Manual

Configuring SATA for RAID Function

(2)-3 Save and exit the BIOS Setup.

(3) Configuring RAID by the RAID BIOS

Enter the RAID BIOS setup utility to configure a RAID array. Skip

this step and proceed to Section 4 if you do not want to create a

RAID.

(3)-1 After the POST memory testing and before the operating

system booting, a message "Press <Ctrl-I> to enter

Configuration Utility" shows up, accordingly, press <CTRL+ I>

to enter the RAID BIOS setup utility.