User`s manual

SHB108 LAG1155 Full-Size SBC User’s Manual

Configuring SATA for RAID Function

2. Configuring SATA controller mode and boot sequence by the

BIOS Setup

You have to make sure whether the SATA controller is configured

correctly by system BIOS Setup and set up BIOS boot sequence for the

SATA hard drive(s)

(2)-1-1 Turn on your system, and then press the Del button to enter

BIOS Setup during running POST (Power-On Self Test). If

you want to create RAID, just go to the Advanced Settings

menu/IDE configuration, select the Configure SATA#1 as,

and press <Enter> for more options.