User`s manual

SHB108 LAG1155 Full-Size SBC User’s Manual
Hardware Installation
30
Step5 Removing the processor:
 Open the socket:
A. Disengage the load lever.
B. Open the load plate.
 Remove the Processor package, holding along the top and
bottom edges, or by using a vacuum pen.
 Maintain Processor horizontal and remove Processor with a
vertical motion to avoid damaging the socket contacts.
 Place the processor in a specially designed tray or ESD retainer
for storage. Do not place directly on table resting on gold lands.
 Assemble LGA1155 socket protective cover:
A Hold protective cover at 45 degree angle to the LGA1155
Socket
B Carefully lower protective cover on hinge side first, to contact
with the outside wall of the LGA1155 Socket: