User`s manual

SHB108 LAG1155 Full-Size SBC User’s Manual

Hardware Installation

Step2 Removing the socket protective cover:

 Place thumb against the front edge of the protective cover and

rest index finger on the rear grip to maintain control of the cover.

 Lift the front edge of the protective cover to disengage from the

socket. Keep control of the cover by holding the rear grip with

index finger.

 Lift protective cover away from the socket, being careful not to

touch the electrical contacts.

NOTE: Vertical removal is NOT recommended, as it requires higher force

and can lead to socket contact damage.

Caution: Never Touch Fragile Socket Contacts to Avoid Damage and

Do Not Touch Processor Sensitive Contacts at Any Time During

Installation.