User`s manual

SHB108 LAG1155 Full-Size SBC User’s Manual
Jumpers And Connectors
20
2.4.17 Ethernet RJ-45 Connectors (LAN1, LAN2)
The RJ-45 connectors LAN1 and LAN2 are for Ethernet. To connect
the board to 100-Base-T or 1000-Base-T hub, just plug one end of
the cable into LAN1 and connect the other end (phone jack) to a 100-
Base-T hub or 1000-Base-T hub.
Pin
Signal
12345678
A B
1
Tx+ (Data transmission positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
4
RJ-1(For 1000 base T-Only)
5
RJ-1(For 1000 base T-Only)
6
Rx- (Data reception negative)
7
RJ-1(For 1000 base T-Only)
8
RJ-1(For 1000 base T-Only)
A
Active LED
B
Speed LED