User`s manual

SHB103 LAG1156 Full-Size SBC User’s Manual

Configuring SATA for RAID Function

(5)-2 When you see the screen below, insert the floppy disk

containing the SATA driver and press “S”.

(5)-3 If the Setup correctly recognizes the driver of the floppy disk,

a controller menu will appear below. Use the ARROW keys to

select Intel® ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID

Controller and press ENTER. Then it will begin to load the

SATA driver from the floppy disk.