User`s manual

SHB103 LAG1156 Full-Size SBC User’s Manual

Hardware Installation

Step5 Removing the processor:

1. Open the socket:

1. Disengage the load lever.

2. Open the load plate.

2. Remove the Processor package, holding along the top and

bottom edges, or by using a vacuum pen.

3. Maintain Processor horizontal and remove Processor with a

vertical motion to avoid damaging the socket contacts.

4. Place the processor in a specially designed tray or ESD

retainer for storage. Do not place directly on table

resting on gold lands.

5. Assemble LGA1156 socket protective cover:

1. Hold protective cover at 45 degree angle to the

LGA1156 Socket

2. Carefully lower protective cover on hinge side

first, to contact with the outside wall of the

LGA1156 Socket: