User`s manual

SHB103 LAG1156 Full-Size SBC User’s Manual

Hardware Installation

Step2 Removing the socket protective cover:

1. Place thumb against the front edge of the protective cover and

rest index finger on the rear grip to maintain control of the cover.

2. Lift the front edge of the protective cover to disengage from the

socket. Keep control of the cover by holding the rear grip with

index finger.

3. Lift protective cover away from the socket, being careful not to

touch the electrical contacts.

Note: Vertical removal is NOT recommended, as it requires

higher force and can lead to socket contact damage.

Caution: Never Touch Fragile Socket Contacts to Avoid

Damage and DO NOT TOUCH PROCESSOR SENSITIVE

CONTACTS AT ANY TIME DURING INSTALLATION.