User`s manual

SHB103 LAG1156 Full-Size SBC User’s Manual
Hardware Installation
23
CHAPTER 3
HARDWARE INSTALLATION
Before installing the processor, please access Intel
®
website for more
detailed information
Processor Integration Video (LGA1156):
http://www.intel.com/support/tw/processors/sb/CS-030860.htm
.
3.1 Installing the Processor
The LGA1156 processor socket comes with a cover to
protect the processor. Please install the processor into the
CPU socket step by step as below:
Step1 Opening the Socket:
1. Disengage load lever by releasing down and out on the hook.
This will clear retention tab.
2. Rotate load lever to open position at approximately 135°.
3. Rotate load plate to open position at approximately 150°.
Note: Apply pressure to corner with right-hand thumb when
opening or closing load lever - otherwise lever will bounce
back (as a mouse trap) causing bent contacts.