User`s manual

SHB103 LAG1156 Full-Size SBC User’s Manual
Jumpers and Connectors
9
2.3.2 CMOS & RTC Clear Jumper (JP8)
You may need to use this jumper is to clear the CMOS
memory if incorrect BIOS settings.
Description Function Jumper Setting
Normal
(Default)
Clear
CMOS
CMOS &
RTC Clear
Clear
RTC
2.3.3 ATX Auto Power On/Off (JP9)
When Jumper JP9 is removed for AC power input, the
system will be automatically powered ON without pressing
soft power button; when JP9 is SHORT for AC power input,
it is necessary to manually press soft power button to make
the system power ON.
Note This function is similar to the feature of Power On after
Power Failed, which is controlled by hardware circuitry
instead of BIOS.
Description Function Jumper Setting
Disable
(Default)
ATX Auto
Power
On/Off
Enable