User`s manual

SBC86834 All-In-One Mini ITX Board User’s Manual

Configuring SATA for RAID Function

(5)-3 If the Setup correctly recognizes the driver of the floppy disk,

a controller menu (as Figure 13) will appear below. Use the

ARROW keys to select Intel(R) 82801GR/GH SATA RAID

Controller (Desktop ICH7R/DH) and press ENTER. Then it

will begin to load the SATA driver from the floppy disk.

Figure 13

Note

If a message on the screen saying that one or some

file(s) cannot be found, please check the floppy disk or

copy the correct SATA driver again from the driver CD.