User`s manual

SBC86834 All-In-One Mini ITX Board User’s Manual

Phoenix-Award BIOS Utility

Disabled

System will never enter SUSPEND mode

1/2/4/6/8/10/2

0/30/40

Min/1 Hr

Defines the continuous idle time before the system

entering SUSPEND mode.

If any item defined in (J) is enabled & active,

SUSPEND timer will be reloaded

z HDD Power Down

If HDD activity is not detected for the length of time specified in this

field, the hard disk drive will be powered down while all other

devices remain active.

z Soft-Off by PWR-BTTN

This option only works with systems using an ATX power supply. It

also allows the user to define which type of soft power OFF

sequence the system will follow. The default value is “Instant-Off”.

Instant-Off

This option follows the conventional manner systems

perform when power is turned OFF. Instant-Off is a soft

power OFF sequence requiring only the switching of the

power supply button to OFF

Delay 4 Sec.

Upon turning OFF system from the power switch, this

option will delay the complete system power OFF

sequence by approximately 4 seconds. Within this delay

period, system will temporarily enter into Suspend Mode

enabling you to restart the system at once.

z Power On by Ring

This option allows the system to resume or wake up upon detecting

any ring signals coming from an installed modem. The default value

is “Enabled”.

z Resume by Alarm

If enable this item, the system can automatically resume after a

fixed time in accordance with the system’s RTC (realtime clock).

z Primary/Secondary IDE 0/1

Use this item to configure the IDE devices monitored by the system.

z FDD, COM, LPT Port

Use this item to configure the FDD, COM and LPT ports monitored

by the system.

Press <Esc> to return to the Main Menu page.