User`s manual

SBC86834 All-In-One Mini ITX Board User’s Manual

Phoenix-Award BIOS Utility

¾ IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let you

set a PIO mode (0-4) for each of the four IDE devices that

the onboard IDE interface supports. Modes 0 to 4 provide

successively increased performance. In Auto mode, the

system automatically determines the best mode for each

device.

¾ IDE Primary/Secondary Master/Slave UDMA

Select the mode of operation for the IDE drive. Ultra DMA-

33/66/100/133 implementation is possible only if your IDE

hard drive supports it and the operating environment

includes a DMA driver. If your hard drive and system

software both support Ultra DMA-33/66/100/133, select Auto

to enable UDMA mode by BIOS.

¾ SATA Mode

There are these options for you to set up SATA mode: IDE

or RAID.

¾ SATA PORT Speed Settings

Use this item to select SATA I or SATA II device support

forcedly.

Press <Esc> to return to the Integrated Peripherals page.