User`s manual

SBC86834 All-In-One Mini ITX Board User’s Manual

Jumpers and Connectors

 ATX Power On/Off Button

This 2-pin connector named as Pin 9 and 10 connect the front

panel’s ATX power button to the CPU card, which allows users to

control ATX power supply to be power on/off.

 System Reset Switch

Pin 11 and 12 can be connected to the case-mounted reset switch

that reboots your computer, not turns OFF the power switch. It is a

better way to reboot your system for a longer life of the system’s

power supply.

 HDD Activity LED

This connection is linked to hard drive activity LED on the control

panel. LED flashes when HDD is being accessed. Pin 13 and 14

connect the hard disk drive to the front panel HDD LED, Pin 13

assigned as -, and Pin 14 as +.