User`s manual

SBC86834 All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
18
2.3.6 CompactFlash™ Voltage Selection Jumper
(JP14)
This jumper is to select the voltage for CompactFlash interface.
Description Function Jumper Setting
3.3V (Default) CompactFlash
Voltage Selection
5V
This Jumper is optional. It is not mounted as a default design.
2.3.7 CompactFlash™ Mode (Master/Slave) Select
Jumper (JP13)
Use this jumper to set Master/Slave CompactFlash interface.
Description Function Jumper Setting
Slave(Default) CompactFlash
Mode
(Master/Slave)
Select
Master
This jumper is optional. It is not mounted as a default design.