User`s manual

SBC86831 Series All-In-One Mini ITX Board User’s Manual

Award BIOS Utility

z Super IO Device

Scroll to this item and press <Enter> to view the sub menu Super

IO Device.

¾ Onboard FDC Controller

Select Enabled if your system has a floppy disk controller

(FDC) installed on the system board and you wish to use it.

If you install and-in FDC or the system has no floppy drive,

select Disabled in this field. The options available are

Enabled, Disabled.

¾ Onboard Serial Port 1 / 2 /3

Select an address and corresponding interrupt for the serial

port. Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,

Disabled, Auto.

¾ Onboard Paralellel Port

This item allows you to determine access onboard parallel

port controller with which I/O address. The options available

are 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.

¾ Parallel Port Mode

Select an operating mode for the onboard parallel (printer)

port. Select Normal unless your hardware and software

require one of the other modes offered in this field. The

options available are EPP1.9, ECP, SPP, ECPEPP1.7,

EPP1.7.

¾ EPP Mode Select

Select EPP port type 1.7 or 1.9.

¾ ECP Mode Use DMA

Select a DMA channel for the parallel port for use during