User`s manual

SBC86831 Series All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
19
2.4.6 LVDS Backlight Connector: CN8
The 7-pin inverter connector on the SBC is with Hirose
connector. The matching connector is strongly recommended to
use Hirose DF13-7S-1.25C.
Pin Signal
1 +12V
2 +12V
3 +5V
4 ENABLE
5 GND
6 GND
7 GND
CN8
1
7
2.4.7 LAN*2 Connectors: CN9_A, CN9_B
The board is equipped with a high performance Plug and Play Ethernet
interface fully compliant with the IEEE 802.3 standard. To connect the
board to 10-Base-T, 100-Base-T or 1000 Base-T hub, just plug one
end of cable to the Ethernet connector and connect the other end
(phone jack) to a 10-Base-T, 100-Base-T or 1000 Base-T hub.
Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI1-
5 MDI2+
6 MDI2-
7 MDI3+
8 MDI3-
A Active LED (Yellow)
B 1000 (Orange) / 100 (Green) LAN
LED
CN9_A
12345678
AB