User`s manual

SBC86831 Series All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
12
2.3.6 LVDS Voltage Selection Jumper: JP11
This jumper is to select the voltage for LVDS interface.
Options Settings
3.3V Short 1-2 (Default)
5V Short 2-3
JP11
12 3
2.3.7 SDVO Card Selection Jumper: JP12
This jumper makes the selection that PCI express x 16 slot enables or
disables the SDVO mode.
Options Settings
SDVO Card
Disable
Short 1-2
SDVO Card
Enable
Short 2-3 (Default)
JP12
12 3
2.3.8 CMOS Clear Jumper: JP14
You may need to use this jumper is to clear the CMOS memory if
incorrect settings in the Setup Utility.
Options Settings
Normal Short 1-2 (Default)
Clear CMOS Short 2-3
JP14
12 3
2.3.9 TPM PP (Physical Presence) Select Jumper:
JP15
Options Settings
Accept both H/W &
S/W signals.
Short 1-2 (Default)
Only Accept H/W
signals.
Short 2-3
JP15
12 3
This jumper is optional. It is not mounted by default design.