User`s manual

SBC81206 PICMG 1.0 SBC User’s Manual

Configuring SATA for RAID Function

(5)-2 When you see the screen below, insert the floppy disk

containing the SATA driver and press “S” (as Figure 12).

Figure 12

(5)-3 If the Setup correctly recognizes the driver of the floppy disk,

a controller menu (as Figure 13) will appear below. Use the

ARROW keys to select Intel(R) 82801GR/GH SATA RAID

Controller (Desktop ICH7R/DH) and press ENTER. Then it

will begin to load the SATA driver from the floppy disk.

Figure 13