User`s manual

SBC81206 PICMG 1.0 SBC User’s Manual

Configuring SATA for RAID Function

(5) Installing the SATA controller driver during the OS installation

Now, the SATA driver disk is ready, and BIOS settings configured, you

can proceed to install Windows XP onto your SATA hard drive using

the SATA driver. Here is an example for Windows XP installation.

(5)-1 Restart your system to boot the Windows XP Setup disk, and

press F6 button as soon as you see the message "Press F6 if

you need to install a 3rd party SCSI or RAID driver" (as

Figure 11). After pressing the F6 button, there will be a few

moments for some files being loaded before next screen

appears.

Figure 11