User`s manual

SBC81206 PICMG 1.0 SBC User’s Manual
Configuring SATA for RAID Function
67
(3)-3 After entering the CREAT VOLUME MENU screen, you can
type the disk array name with 1~16 letters (letters cannot be
special characters) in the item “Name”. When finished, press
ENTER to select a RAID level (as Figure 5). There are two
RAID levels, RAID0 and RAID1. Select a RAID level and
press ENTER.
Figure 5
(3)-4 Set the stripe block size (as Figure 6). The KB is the standard
unit of stripe block size. The stripe block size can be 4KB to
128KB. After the setting, press ENTER for the array capacity.
Figure 6