User`s manual

SBC81206 PICMG 1.0 SBC User’s Manual

Phoenix-Award BIOS Utility

z Super IO Device

Scroll to this item and press <Enter> to view the sub menu Super

IO Device.

¾ Onboard FDC Controller

Select Enabled, if your system has a floppy disk controller

(FDC) installed on the system board and you want to use it.

If you install and-in FDC or the system has no floppy drive,

select Disabled in this field. Options: “Enabled” and

“Disabled”.

¾ Onboard Serial Port 1/2

Select an address and corresponding interrupt for the serial

port.

¾ Parallel Port Mode

Select an operating mode for the onboard parallel (printer)

port. Select Normal unless your hardware and software

require another mode in this field. There are several options

for your selection, “EPP1.9”, “ECP”, “SPP”, “ECPEPP1.7”,

“EPP1.7”, etc.

¾ EPP Mode Select

Select EPP port type 1.7 or 1.9.

¾ ECP Mode Use DMA

Select a DMA channel for the parallel port while using the

ECP mode.