User`s manual

SBC81206 PICMG 1.0 SBC User’s Manual

Jumpers and Connectors

2.4.5 USB Connectors (USB1, USB2)

These Universal Serial Bus (USB) connectors on this board are for

installing versatile USB interface peripherals. These are 10-pin

standard USB connectors.

Pin Signal Pin Signal

1 +5V 2 +5V

3 USB D4- 4 USB D5-

5 USB D4+ 6 USB D5+

7 Ground (GND) 8 Ground (GND)

9 NC 10 Ground (GND)

USB1

Pin Signal Pin Signal

1 +5V 2 +5V

3 USB D2- 4 USB D3-

5 USB D2+ 6 USB D3+

7 Ground (GND) 8 Ground (GND)

9 NC 10 Ground (GND)

USB2

2.4.6 USB Port Connector (USB3/USB4)

The 4-pin standard Universal Serial Bus (USB) port connector on the

board is for the installation of peripherals supporting the USB interface.

Pin Signal

1 USB POWER

2 USB -

3 USB +

4 GND

USB3/4

1234