User`s manual

PICO822 Intel

Atom

E620T/E680T All-In-One Pico-ITX Board

96 Drivers Installation

5.3 Installing AHCI Driver during OS Installation

PCH EG20T SATA does not support an IDE interface that is compatible with Legacy.

Windows

XP* SP3 does not contain the required SATA AHCI driver natively hence you must

follow the instructions below to install the PCH EG20T SATA AHCI driver. Here is an example

for Windows

XP installation.

1. Copy the following files in FD_Inst_WinXP directory in the SATA driver package to the root

of a floppy disk.

 iohsata.cat

 iohsata.inf

 iohsata.sys

 txtsetup.oem

2. Insert the floppy disk prepared in step 1 into the USB floppy drive and connect it to the

USB port.

3. Insert Windows

XP* SP3 installer into the CD-ROM and boot from the CD-ROM to start

Windows

XP* SP3 installation.

4. Press <F6> to add further SCSI/RAID drivers when prompted during the very early stage

of Windows

installation.