PICO822 ® Intel AtomTM E620T/E680T All-In-One Pico-ITX Board User’s Manual
Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use. Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. Axiomtek does not make any commitment to update the information in this manual.
ESD Precautions Computer boards have integrated circuits sensitive to static electricity. To prevent chipsets from electrostatic discharge damage, please take care of the following jobs with precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before holding the board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. It discharges static electricity from your body.
Table of Contents Disclaimers ..................................................................................................... ii ESD Precautions ........................................................................................... iii Chapter 1 Introduction ............................................. 1 1.1 Features ............................................................................................... 2 1.2 Specifications ..........................................................
4.1 Starting ............................................................................................... 27 4.2 Navigation Keys ................................................................................ 27 4.3 Main Menu.......................................................................................... 29 4.4 Advanced Menu ................................................................................. 30 4.5 Chipset Menu ............................................................
Sample Program ........................................................................................
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Chapter 1 Introduction ® TM The PICO822 is a Pico-ITX board with Intel Atom single core E620T/E680T and PCH EG20T chipset that delivers outstanding system performance through high-bandwidth interfaces, multiple I/O functions for interactive applications and various embedded computing solutions.
® TM PICO822 Intel Atom 1.1 Features ® Specifications CPU TM Ultra low power Intel Atom single core E620T (0.6GHz) and E680T (1.6GHz) ® Intel PCH EG20T 2 COM ports 4 USB 2.0 and 1 client USB 2.0 1 Gigabit/Fast Ethernet Onboard SATA SSD (optional) 1.2 E620T/E680T All-In-One Pico-ITX Board ® Intel Atom TM single core E620T (0.6GHz) and E680T (1.6GHz). System Chipset ® Intel PCH EG20T. BIOS American Megatrends Inc. UEFI (Unified Extensible Firmware Interface) BIOS.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board SMBus System Management Bus for advanced monitoring/control. Expansion Connector 2x30-pin high speed connector; containing one serial digital video out, one PCI-Express x1, one USB 2.0, one serial port, one digital I/O and one SMBus. Power Input Customed connector via power cable. +12V DC-in only. Power Management ACPI (Advanced Configuration and Power Interface). Form Factor Pico-ITX form factor. Note: 1.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board This page is intentionally left blank.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Chapter 2 Board and Pin Assignments 2.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Bottom View 6 Board and Pin Assignments
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Side View Board and Pin Assignments 7
® TM PICO822 Intel Atom 2.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Bottom View Board and Pin Assignments 9
® TM PICO822 Intel Atom 2.3 E620T/E680T All-In-One Pico-ITX Board Assembly Drawing Heatsink for PICO822 (see image below): First of all, screw heatsink into heatspreader.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board For thermal dissipation, a heatspreader enables the PICO822’s components to dissipate heat efficiently. Images below illustrate how to install the heat spreader. Installing Heatspreader The PICO822 has four assembly holes for installing heatspreader plate. Align both of them and use the four screws to firmly secure the heatspreader plate to the PICO822. Be careful not to over-tighten the screws.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Installing Heatspreader and AX93268 Expansion Module Gently insert expansion module into SCN1. Align four assembly holes and use the four screws to firmly secure the heatspreader plate and expansion module to the PICO822. Be careful not to over-tighten the screws. See chapter 3 for details of AX93268 expansion module.
® TM PICO822 Intel Atom 2.4 E620T/E680T All-In-One Pico-ITX Board Switch Settings Properly configure switches on the PICO822 to meet your application purpose. Below you can find a summary table of onboard default settings. Note: Once the default setting needs to be changed, please do it under power-off condition. Switch SW1 SW2 Description Setting LVDS Voltage Selection Default: +3.3V LVDS Brightness Control Voltage Selection Default: 0V SW1-1 ON SW1-2 OFF SW2-1 ON SW2-2 OFF 2.4.
® TM PICO822 Intel Atom 2.5 E620T/E680T All-In-One Pico-ITX Board Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware.
® TM PICO822 Intel Atom 2.5.3 E620T/E680T All-In-One Pico-ITX Board USB and Front Panel Connector (CN4) The CN4 is for USB and front panel signal connector. Pin Signal Pin Signal 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 USB_PWR USB_0# USB_0 USB_GND USB_GND USB_2 USB_2# USB_PWR USB_Client_DT +5VS / N.C N.C GND GND GND HDD LED DT 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 USB_PWR USB_1# USB_1 USB_GND USB_GND USB_3 USB_3# USB_PWR USB_Client# USB_Client GND +5VS PWR_BUTTON Reset +3.
® TM PICO822 Intel Atom 2.5.4 E620T/E680T All-In-One Pico-ITX Board LVDS Connector (CN6) This board has a 30-pin connector for LVDS LCD interface. It is strongly recommended to use the matching JST SHDR-30VS-B 30-pin connector for LVDS interface. Pin 27~30 VCCM can be set to +3.3V or +5V by setting SW1 (see section 2.4.1).
® TM PICO822 Intel Atom 2.5.5 E620T/E680T All-In-One Pico-ITX Board COM and Audio Connector (CN7) The CN7 is a 40-pin connector for two COM (RS-232), GPIO (digital I/O) and audio interface.
® TM PICO822 Intel Atom 2.5.6 E620T/E680T All-In-One Pico-ITX Board Ethernet Connector (CN8) The CN8 is a connector for Ethernet interface. Pin Signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1000_LAN_LED 100_LAN_LED GND MDI3MDI3+ MDI1MDI2MDI2+ MDI1+ MDI0MDI0+ GND VDD3 LINK_ACT GND GND 2.5.7 Serial ATA Connector (SATA1) This Serial Advanced Technology Attachment (Serial ATA or SATA) connector is for high-speed SATA interface port.
® TM PICO822 Intel Atom 2.5.9 E620T/E680T All-In-One Pico-ITX Board Expansion Connector (SCN1) The board is equipped with an expansion connector (SCN1) on the bottom side. This SCN1 is for connecting PICO822 to expansion module such as AX93268 (see Appendix A for the details of AX93268).
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board This page is intentionally left blank.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Chapter 3 Hardware Description 3.1 Microprocessors ® TM The PICO822 supports Intel Atom processor E620T and E680T, which enable your system ® to operate under Windows XP environment. Moreover, the PICO822 with E680T can operate ® under Windows 7 environment. The system performance depends on the microprocessor. Make sure all correct settings are arranged for your installed microprocessor to prevent the CPU from damages. 3.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board ® 3. The Intel E620 CPU clock speed has already set to designed lowest rate possible 0.6G, ® hence Intel SpeedStep function will not perform any CPU speed changing. 4. Clear CMOS function is not supported in PICO822. 3.3 BIOS The PICO822 uses AMI Plug and Play BIOS with a single 16Mbit SPI Flash. 3.4 System Memory The PICO822 has 1GB DDR2 SDRAM onboard.
® TM PICO822 Intel Atom 3.5 E620T/E680T All-In-One Pico-ITX Board I/O Port Address Map ® TM The Intel Atom processor E6xx series communicate via I/O ports. Total 1KB port addresses are available for assigning to other devices via I/O expansion cards.
® TM PICO822 Intel Atom 24 E620T/E680T All-In-One Pico-ITX Board Hardware Description
® TM PICO822 Intel Atom 3.
® TM PICO822 Intel Atom 3.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Chapter 4 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This chapter provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility. 4.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Hot Keys Description Left/Right The Left and Right keys allow you to select a setup screen. Up/Down The Up and Down keys allow you to select a setup screen or sub-screen. + Plus/Minus The Plus and Minus keys allow you to change the field value of a particular setup item. Tab The key allows you to select setup fields. F1 The key allows you to display the General Help screen.
® TM PICO822 Intel Atom 4.3 E620T/E680T All-In-One Pico-ITX Board Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below. The Main BIOS setup screen is shown below. Memory Information Display the auto-detected memory information. System Language Use this option to choose the system default language.
® TM PICO822 Intel Atom 4.4 E620T/E680T All-In-One Pico-ITX Board Advanced Menu Launch PXE OpROM Use this item to enable or disable the boot ROM function of the onboard LAN chip when the system boots up. The Advanced menu also allows users to set configuration of the CPU and other system devices.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board CPU Configuration This screen shows the CPU Configuration. Intel Virtualization Technology This item allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. Legacy USB Support Use this item to enable or disable support for USB device on legacy operating system. The default setting is Enabled. Auto option disables legacy support if no USB devices are connected.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board F81801 Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of 0he selected item appears on the right side of the screen. For items marked with “”, please press for more options. Serial Port 0~1 Configuration Enable or disable serial port 0 to 1.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board F81801 H/W Monitor This screen monitors hardware health status. This screen displays the temperature of CPU and system voltages (VCORE and +3.3V).
® TM PICO822 Intel Atom 4.5 E620T/E680T All-In-One Pico-ITX Board Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► North Bridge Chipset Configuration ► South Bridge Chipset Configuration For items marked with “”, please press for more options.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board North Bridge Chipset Configuration This screen allows users to configure parameters of North Bridge chipset. Memory Information Display the auto-detected memory information. IGD Mode Select Default enabled and 8MB are shared from system memory to IGD (Integrated Graphics Device). MSAC Mode Select Default enabled and 256MB are the graphics memory Multi-Size Aperture Control used by IGD (Integrated Graphics Device).
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Boot Display Configuration This screen provides access to boot display parameter settings.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Boot Display Device Select boot display device. Auto is the default. External CRT is worked when AX93268 is installed (see Appendix A). Flat Panel Type Select flat panel resolution.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board South Bridge Chipset Configuration This screen allows users to configure parameters of South Bridge chipset. Audio Controller Enable or disable the HD audio controller. SMBus Controller Enable SMBus controller.
® TM PICO822 Intel Atom 4.6 E620T/E680T All-In-One Pico-ITX Board Boot Menu The Boot menu allows users to change boot options of the system. Quiet Boot Select to display either POST output messages or a splash screen during boot-up. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Boot Option Priorities These are settings for boot priority. Specify the boot device priority sequence from the available devices.
® TM PICO822 Intel Atom 4.7 E620T/E680T All-In-One Pico-ITX Board Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu. Select Save Changes and Exit from the Save & Exit menu and press . Select Yes to save changes and exit.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press . Select Yes to discard changes. Restore Defaults It automatically sets all Setup options to a complete set of default settings when you select this option. Select Restore Defaults from the Save & Exit menu and press .
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Chapter 5 Drivers Installation Drivers for Windows® XP 5.1 The device drivers are located on the product information CD that comes with the PICO822 series package. The auto-run function of drivers will guide you to install the utilities and device ® drivers under Windows XP operating system. You can follow the onscreen instructions to install these devices: Chipset PCH Graphics Audio Ethernet Serial (COM) port 5.1.1 1.
® TM PICO822 Intel Atom 44 E620T/E680T All-In-One Pico-ITX Board ® 2. An Intel License Agreement screen appears to show you the important information. Click “Yes” to next step. 3. A Readme File Information screen appears to show you the system requirements and installation information. Click “Next” to next step.
® TM PICO822 Intel Atom 4. E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations.
® TM PICO822 Intel Atom 5. 46 E620T/E680T All-In-One Pico-ITX Board You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.1.2 E620T/E680T All-In-One Pico-ITX Board Installing PCH Driver 1. Run the PCH_EG20T_WinXP_WePOS_All_260.EXE program from the driver directory in product information CD. Click “Next” to next step. 2. An Intel License Agreement screen appears to show you the important information. Click “I accept the terms in the license agreement” and “Next” to next step.
® TM PICO822 Intel Atom 48 E620T/E680T All-In-One Pico-ITX Board 3. Click “Complete” and “Next” to next step. 4. To begin installation, click “Install” to next step.
® TM PICO822 Intel Atom 5. E620T/E680T All-In-One Pico-ITX Board Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom 50 E620T/E680T All-In-One Pico-ITX Board 6. Click “Continue Anyway” to next step. 7. Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom 8. Click “Continue Anyway” to next step. 9. Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 10. Click “Continue Anyway” to next step. 11. Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 12. Click “Continue Anyway” to next step. 13. Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 14. Click “Finish” to complete the installation. 5.1.3 1. 54 Installing Graphics Driver Run the WindowsDriverSETUP.cmd program from the driver directory in product information CD.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 2. Click “Install driver and application files” to next step. 3. An Intel License Agreement screen appears to show you the important information. Select “I agree” and click “Install” to next step.
® TM PICO822 Intel Atom 56 E620T/E680T All-In-One Pico-ITX Board 4. Click “Continue Anyway” to next step. 5. Click “Continue Anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 6. Click “Continue Anyway” to next step. 7. You will be asked to restart your computer when the installation is completed. Please click “Yes” if you don’t need to install any other drivers. Otherwise, please click “No” to go on next step.
® TM PICO822 Intel Atom 5.1.4 58 E620T/E680T All-In-One Pico-ITX Board Installing Audio Driver 1. Run the WDM_R266.exe for audio from the driver di in product information CD. Click “Next” to continue. 2. Please wait while setup processes the following operations.
® TM PICO822 Intel Atom 3. E620T/E680T All-In-One Pico-ITX Board You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.1.5 60 E620T/E680T All-In-One Pico-ITX Board Installing Ethernet Driver 1. Run the SETUP.EXE for Ethernet from the driver directory in product information CD. Click “Next” to continue. 2. Click “Install” to start the installation.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 3. Please wait while setup processes the following operations. 4. Click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.1.6 62 E620T/E680T All-In-One Pico-ITX Board Installing Serial (COM) Port Driver 1. Run the comport.exe from the driver directory in product information CD. Click “Next” to continue. 2. You will be asked to restart your computer when the installation is completed. Please click “Yes” if you don’t need to install any other drivers. Otherwise, please click “No” to go on next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Drivers for Windows® 7 5.2 The device drivers are located on the product information CD that comes with the PICO822 series package. The auto-run function of drivers will guide you to install the utilities and device ® drivers under Windows 7 operating system.
® TM PICO822 Intel Atom 64 E620T/E680T All-In-One Pico-ITX Board ® 2. An Intel License Agreement screen appears to show you the important information. Click “Yes” to next step. 3. A Readme File Information screen appears to show you the system requirements and installation information. Click “Next” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 4. Click “Install this driver software anyway” to next step. 5. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 6. 66 E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations.
® TM PICO822 Intel Atom 7. E620T/E680T All-In-One Pico-ITX Board You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.2.2 68 E620T/E680T All-In-One Pico-ITX Board Installing PCH Driver 1. Run the EG20T_Win7_Setup_140.exe program from the driver directory in product information CD. Click “Next” to next step. 2. An Intel License Agreement screen appears to show you the important information. Click “I accept the terms in the license agreement” and “Next” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 3. Select the features you want to install and deselect the features you do not want to install. Then click “Next” to next step. 4. Click “Install” to begin the installation.
® TM PICO822 Intel Atom 70 E620T/E680T All-In-One Pico-ITX Board 5. Click “Install this driver software anyway” to next step. 6. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 7. E620T/E680T All-In-One Pico-ITX Board Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 8. 72 E620T/E680T All-In-One Pico-ITX Board Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 9. E620T/E680T All-In-One Pico-ITX Board Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 10. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 11. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 12. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 13. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 14. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 15. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 16. You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.2.3 Note: 1. E620T/E680T All-In-One Pico-ITX Board Installing Graphics Driver ® After Windows 7 installation completed, the system is in 16 colors, please install the graphics driver for displaying correct or higher color depth. Run the Setup.exe program for graphics from the driver directory in product information CD. Click “Next” to continue.
® TM PICO822 Intel Atom 82 E620T/E680T All-In-One Pico-ITX Board ® 2. An Intel License Agreement screen appears to show you the important information. Click “Yes” to next step. 3. A Readme File Information screen appears to show you the system requirements and installation information. Click “Next” to next step.
® TM PICO822 Intel Atom 4. E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 5. 84 E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 6. E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations. Click “Next” to continue.
® TM PICO822 Intel Atom 7. 86 E620T/E680T All-In-One Pico-ITX Board You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.2.4 E620T/E680T All-In-One Pico-ITX Board Installing Audio Driver 1. Run the 32bit_Vista_Win7_R268.exe for audio from the driver directory in product information CD. Click “Next” to continue. 2. Please wait while setup processes the following operations.
® TM PICO822 Intel Atom 3. 88 E620T/E680T All-In-One Pico-ITX Board You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot. Otherwise, please select “No, I will restart my computer later” and click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.2.5 E620T/E680T All-In-One Pico-ITX Board Installing Ethernet Driver 1. Run the SETUP.EXE for Ethernet from the driver directory in product information CD. Click “Next” to continue. 2. Click “Install” to start the installation.
® TM PICO822 Intel Atom 90 E620T/E680T All-In-One Pico-ITX Board 3. Please wait while setup processes the following operations. 4. Click “Finish” to complete the installation.
® TM PICO822 Intel Atom 5.2.6 E620T/E680T All-In-One Pico-ITX Board Installing SATA Driver 1. Run the EG20T_Win7_SATA_setup_120.exe program from the driver directory in product information CD. Click “Next” to continue. 2. An Intel License Agreement screen appears to show you the important information. Click “I accept the terms in the license agreement” and “Next” to next step.
® TM PICO822 Intel Atom 92 E620T/E680T All-In-One Pico-ITX Board 3. When the following screen appears, select and deselect features according to you needs. Click “Next” to continue. 4. Click “Install” to start the installation.
® TM PICO822 Intel Atom 5. E620T/E680T All-In-One Pico-ITX Board Please wait while setup processes the following operations. Click “Install this driver software anyway” to next step.
® TM PICO822 Intel Atom 94 E620T/E680T All-In-One Pico-ITX Board 6. Please wait while setup processes the following operations. Click “Next” to continue. 7. You will be asked to reboot your computer when the installation is completed. Please select “Yes, I want to restart my computer now” if you don’t need to install any other drivers. Then click “Finish” to complete the setup process and reboot.
® TM PICO822 Intel Atom 5.2.7 E620T/E680T All-In-One Pico-ITX Board Installing Serial (COM) Port Driver 1. Run the comport.exe from the driver directory in product information CD. Click “Next” to continue. 2. You will be asked to restart your computer when the installation is completed. Please click “Yes” if you don’t need to install any other drivers. Otherwise, please click “No” to go on next step.
® TM PICO822 Intel Atom 5.3 E620T/E680T All-In-One Pico-ITX Board Installing AHCI Driver during OS Installation PCH EG20T SATA does not support an IDE interface that is compatible with Legacy. ® Windows XP* SP3 does not contain the required SATA AHCI driver natively hence you must follow the instructions below to install the PCH EG20T SATA AHCI driver. Here is an example ® for Windows XP installation. 1.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board 5. Press to add an additional SCSI device. ® 6. Select the correct driver (PCH EG20T SATA AHCI Controller for Windows XP) and press to continue the installation. This will install the PCH EG20T SATA AHCI controller driver.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board ® 7. Finish the Windows XP installation according to your needs. Some USB floppy drivers are not supported when you press (step 4 above) during installation. See details at http://support.microsoft.com/kb/916196/en-us . Note: If a message on the screen saying that one or some file(s) cannot be found, please check the floppy disk or copy the correct AHCI driver again from the driver CD.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Appendix A Expansion Module (Optional) The AX93268 (optional) is an expansion module for PICO822. Its specifications and detailed information are given in this appendix. AX93268 Specifications Size 100mm x 72mm Features One 1.0mm pitch 16-pin connector as VGA connector. VGA resolution is up to 1920x1080. One PCI-Express Mini Card socket. Note: All specifications and images are subject to change without notice.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board AX93268 Dimensions and Fixing Holes Top View 100 Expansion Module (Optional)
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Bottom View Expansion Module (Optional) 101
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Side View 102 Expansion Module (Optional)
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board AX93268 Layout Top View Expansion Module (Optional) 103
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware. Connector Description CN1 VGA Connector CN2 PCI-Express Mini Card Connector CN3 Expansion Connector VGA Connector (CN1) This is a 16-pin connector for VGA interface.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board PCI-Express Mini Card Connector (CN2) This is a PCI-Express Mini Card connector which supports PCI-Express x1 link and USB 2.0 link. A PCI-Express Mini Card can be applied to either PCI-Express or USB 2.0. It complies with PCI-Express Mini Card Spec. V1.2.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Expansion Connector (CN3) The CN3 is for connecting this expansion module to PICO822. Please gently insert CN3 into SCN1 of PICO822.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Appendix B Watchdog Timer About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program. How to Use Watchdog Timer Start 1. Enable Configuration: -O 2E 87 -O 2E 87 2. Select Logic device: -O 2E 07 -O 2F 07 3. Enable WDT: -O 2E 30 -O 2F 01 4. Activate WDT: -O 2E F0 -O 2F 80 5.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board This page is intentionally left blank.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board Appendix C Digital I/O About Digital I/O The onboard GPIO (digital I/O) has 8 bits. Each bit can be set to function as input or output by software programming. In default, GPIO0~GPIO6 are pulled high with +5V level (according to standby power) and GPIO8 is pulled high with +3.3V level (according to main power). The BIOS default settings are 8 inputs where all of these pins are set to 1.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board else { printf("\n"); printf("Usage: %s port [output]\n", argv[0]); printf(" port Specify the port number (port=0-11 decimal).\n"); printf(" output Specify the port value (output=0 | 1).\n"); printf(" When this is not specified, the port direction is set input mode.\n"); printf(" When this is specified, the port is output mode.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board } } predictedLength = requiredLength; deviceInterfaceDetailData = malloc (predictedLength); if(deviceInterfaceDetailData) { deviceInterfaceDetailData->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA); } else { printf("Couldn't allocate %d bytes for device interface details.
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board printf("\n=========================\n"); printf("GPIO Device Driver Check(%s) \n", DriverName); printf("=========================\n"); if (argc>0) { portnum = (UCHAR)atoi(argv[0]); printf("Specified port number : %d\n", (INT)portnum); } printf("\n*** CreateFile(%s) \n", DriverName); hDevice = CreateFile(DriverName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_FLAG_OVERLAPPED,NULL); if(hDevice != INVALID_HANDLE_VAL
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board } } } else if (argc == 2) { portval = (UCHAR)atoi(argv[1]); printf("Specified port value : %s\n", (portval ? "HIGH" : "LOW")); printf("\n*** DeviceIoControl(code:IOCTL_GPIO_DIRECTION <0, GPIO%d, OUTPUT, 0>)\n", (INT)portnum); objGpioReqtOut.port=0; objGpioReqtOut.pins=(1<
® TM PICO822 Intel Atom E620T/E680T All-In-One Pico-ITX Board if(CloseHandle(hDevice)) { printf("\n*** CloseHandle(hDevice:%08X)\n", (UINT)hDevice); if(CloseHandle(hDevice)) { printf(" Sucess CloseHandle\n"); bRc = TRUE; } } } else { printf("Failue CreateFile %s (LastError:%d)\n", DriverName, (INT)GetLastError()); } return bRc; } 114 Digital I/O
