User`s manual

PICO820 Series All-In-One PICO ITX Board User’s Manual
Installation of Drivers
42
4.9 Power Management Setup
The Power Management Setup allows you to save energy of your
system effectively. It will shut down the hard disk and turn OFF video
display after a period of inactivity.
 ACPI Function
This item allows you to enable/disable the Advanced Configuration
and Power Management (ACPI). The function is always “Enabled”.
 Power Management
This option allows you to select the type (or degree) of power saving for
Doze, Standby, and Suspend modes. The table below describes each
power management mode:
Max Saving
It is maximum power savings, only available for SL
CPUs. The inactivity period is 1 minute in each mode.
User Define
It sets each mode. Select time-out periods in the PM
Timers section.
Min Saving
It is minimum power savings. The inactivity period is 1
hour in each mode (except the hard drive).
Disabled
Default value