User`s manual

PICO820 Series All-In-One PICO ITX Board User’s Manual

Installation of Drivers

CHAPTER 4

PHOENIX-AWARD BIOS UTILITY

The Phoenix-Award BIOS provides users with a built-in Setup program

to modify basic system configuration. All configured parameters are

stored in a battery-backed-up RAM (CMOS RAM) to save the Setup

information whenever the power is turned off.

4.1 Entering Setup

There are two ways to enter the Setup program. You may either turn

ON the computer and press <Del> immediately, or press the <Del>

and/or <Ctrl>, <Alt>, and <Esc> keys simultaneously when the following

message appears at the bottom of the screen during POST (Power on

Self Test).

TO ENTER SETUP PRESS DEL KEY

If the message disappears before you respond and you still want to

enter Setup, please restart the system to try it again. Turning the

system power OFF and ON, pressing the “RESET” button on the

system case or simultaneously pressing <Ctrl>, <Alt>, and <Del> keys

can restart the system. If you do not press keys at the right time and the

system doesn’t boot, an error message will pop out to prompt you the

following information:

PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP