User`s manual

PICO820 Series All-In-One PICO ITX Board User’s Manual
Jumpers and Connectors
9
2.3 Jumper Settings
Proper jumper settings configure the PICO820 to meet your application
purpose. We are herewith listing a summary table of all jumpers and
default settings for onboard devices, respectively.
Jumper
Default Setting
Jumper Setting
JP1
Flat Panel Power Selection:
Optional or Default : 3.3V
Short 1-2
JP3
AUTO BUTTON Mode Selection
Optional or Default : OFF
Short 2-3
JP4
CompactFlash Voltage Selection
Optional or Default : 3.3V
Short 1-2
JP5
Clear CMOS Setting: Normal
Short 1-2
2.3.1 Flat Panel Connector Voltage Selection Jumper
(JP1)
The board supports +3.3V or +5V flat panel displays. Configure the
jumper JP1 to the appropriate voltage of the flat panel (CN5).
Description
Function
Jumper Setting
Flat Panel
Connector (CN5)
Voltage Selection
3.3V (Default)
5V