User`s manual

PICO121 AMD G-Series Embedded SoC Pico-ITX Board
DASH User Guide 85
8.1.2 Software Installation
After setting BIOS as section 8.1.1 shown and installing OS, such as Windows
®
7 or
Windows
®
8, when you install Ethernet driver, please check DashClient (see section
7.2). Then it turns the device into a DASH enabled computer on the client side. You can
use a console device with Realtek Management Console installed to control and monitor
a remote DASH enabled computer (see section 8.2.1).
8.2 Console Side
8.2.1 Management Console Tool
Please install Realtek Management Console under Windows
®
Vista or Windows
®
with
version above Vista, such as Windows
®
7 and Windows
®
Server 2008.
 Discovery
You can use Discovery page to find computers capable of ASF or DASH. In the
discovery phase, you can find ASF or DASH manageable computers by giving a range
of IP addresses along with port lists and protocols specified. When computers are found,
they would be shown in the window. By double clicking the found IP, a Manageability
page would appear. Figure 6 shows the results when finding a range of computers from
192.168.0.1 to 192.168.0.255. In addition to the current found devices, computers ever
discovered are also listed in the left pane of the window.
Figure 6: Discover Manageable Devices