User`s manual

PICO121 AMD G-Series Embedded SoC Pico-ITX Board
DASH User Guide 81
Chapter 8
DASH User Guide
8.1 Client Side
8.1.1 BIOS Settings
Please check the PXE remote boot is enabled as Figure 1 before you use this agent.
During the late of BIOS POST, you can press <Shift + F10> to launch this agent as
Figure 2(a). You need to supply a valid login username and password pair for
authentication. The default account name is Administrator with the corresponding
password Axiomtek as Figure 2(b). After successful authentication, you can change the
network settings along with the account information. Figure 3 shows the screen shoot of
the agent. Please press <F4> to save the changes whenever you want to modify
settings and reboot.
Figure 1: Boot Menu